Mold Remediation in Englewood, CO

Mold needs moisture to grow, so lasting mold removal starts with finding and fixing the water. We contain the area, remove mold-damaged materials, clean what can be saved and dry everything out.

Call (303) 879-1370

Open 24/7
10+ years in restoration
Water, mold, sewage & fire
Homes & businesses

Quick answer: Mold remediation finds and fixes the moisture source, sets up containment so spores don't spread, removes mold-damaged materials, cleans and dries what can be saved and verifies the area is dry. In Englewood, mold most often follows basement leaks, slow plumbing leaks and roof leaks. Call (303) 879-1370.

Colorado's dry air helps, but it doesn't stop mold. Basements, bathrooms, wall cavities behind leaky plumbing and attics under roof leaks can stay damp for weeks. Mold spores are everywhere, indoors and out. Give them moisture and something to eat, such as drywall paper, wood or carpet backing, and they grow.

What mold remediation includes

Inspection to find visible mold and the moisture feeding it
Moisture readings to map hidden dampness in walls, floors and ceilings
Containment with plastic sheeting and negative air pressure
HEPA air filtration during the work
Removal of mold-damaged drywall, insulation, carpet and trim
HEPA vacuuming and cleaning of framing and hard surfaces
Drying the structure to normal moisture levels
Coordination with plumbers or roofers to fix the source
Rebuild once the area is clean and dry

Where mold grows in Englewood homes

Location	Common moisture source
Basements	Seepage, past floods, high humidity, leaks from water heaters and washers
Bathrooms	Poor ventilation, leaking shower pans and toilet seals
Under sinks	Slow drips from supply lines and drain fittings
Behind walls	Pinhole leaks in old pipes, condensation on cold exterior walls
Attics	Roof leaks, ice dams, bathroom fans venting into the attic
Crawl spaces	Ground moisture, plumbing leaks, poor vapor barriers

Signs you may have a mold problem

A musty, earthy smell, especially in basements or closets (learn what causes it)
Spots or fuzzy growth on walls, ceilings, grout or wood
Water stains or peeling paint that keep coming back
Allergy-like symptoms that improve when you leave the house

How mold remediation works

Find the water. No remediation lasts unless the moisture source is fixed.
Contain. Seal off the work area so spores don't spread to clean rooms.
Filter the air. HEPA air scrubbers run during the work.
Remove. Take out porous materials with mold growth.
Clean. HEPA-vacuum and clean framing and hard surfaces.
Dry and verify. Dry the area and confirm moisture levels are normal before rebuilding.

What affects the cost of mold remediation

Size of the affected area, where it is (open wall vs inside an HVAC system or crawl space), how much material must be removed and how much rebuild is needed all drive cost. A small patch behind a vanity costs much less than mold across a finished basement.

DIY or call a pro?

The EPA's rule of thumb: you can generally clean up an area of less than about 10 square feet yourself. Wear gloves, goggles and an N-95 mask, scrub hard surfaces with detergent and water, and dry them fully. Throw away moldy porous materials.

Call a professional if the area is larger, the mold is inside walls or ductwork, it followed a sewage backup, or anyone in the home has asthma, allergies or a weakened immune system.

Found mold after a leak? Call and we'll help you size up the problem.

Call (303) 879-1370

Keeping mold from coming back

Keep indoor humidity below 60 percent, ideally between 30 and 50 percent. Use bathroom and kitchen exhaust fans. Fix leaks right away and dry wet materials within 24 to 48 hours. In basements, a dehumidifier can help. See our guide on choosing a dehumidifier.

Mold remediation questions

How fast does mold grow after water damage?

Mold can begin to grow within 24 to 48 hours on wet materials, according to the EPA. That's why fast drying after a leak is the best way to prevent mold.

Can I remove mold myself?

The EPA says you can usually handle an area smaller than about 10 square feet yourself, using gloves, eye protection and a mask. Larger areas, mold inside walls or HVAC systems, and mold after sewage need professional remediation.

Do I need mold testing?

Often not. The CDC and EPA say that if you can see or smell mold, testing usually isn't needed to decide on cleanup. Testing can help in specific cases, such as finding hidden mold or checking results after remediation.

Is black mold more dangerous than other mold?

The CDC says the color of mold doesn't tell you how dangerous it is. All mold should be removed and the moisture source fixed, no matter the color.

Will bleach kill mold?

The EPA doesn't generally recommend bleach for mold cleanup. On hard surfaces, detergent and water work. Porous materials with mold growth, such as drywall and carpet, usually need to be removed and replaced.

Does insurance cover mold removal?

Coverage is often limited. Many policies cover mold only when it results from a covered water loss, such as a burst pipe, and may cap the amount. Mold from long-term leaks or humidity is usually excluded.